What's the best carrier for transporting my bearded dragon safely?

You can either leave him in his terrarium, and move it entirely, or get a small transport box or plastic box with a lid (make sure you cut slits into the box or punch holes in it so air can get into it) and put paper towels into the box. That should be sufficient, Make sure your beardie has access to moisture /some food and is in a place in the car that does not get directly cooled off by the AC. He would prefer to be in a fairly temperate climate. If you are staying overnight somewhere, you could leave him in the car in the box) which will be less stressful than moving him around .

Under a surface heat pads are good for helping them thermoregulate. There is only a risk of being burnt if directly exposed to the heat source (i.e. hot rocks). It's important that the heat pad is only under a portion of the enclosure not to exceed 50% of the surface. You always want a cool side of the enclosure and a warm side, so Loki go where is best for him. Make sure the heat pad is not too hot (if it's too hot for your skin, then it's too hot for him). I've found they do well when the heat pad is on a medium, or mild setting depending on the ambient temperature and eclosure. It may take a little experimenting to see what temperature seems best for him. I hope that helps and all is well with Loki.

You can put a warmwater bottle inside the terrarium or one or two coke bottles filled with hot water. Make sure you put a towel around the hot water bottles, so your beardy does not come into direct contact with the bottles and gets burned. This should tide her over until you have power again.

Congratulations on your new addition! The tank is sufficient for a juvenile, however you will likely need a larger one when Sonora is fully grown. Make sure Sonora can get into and out of the bowl easily to prevent drowning. Place thermometers in the enclosure to monitor temperature. You will need 3. One at the cool side, one on the warm side and one for the basking spot. Hygrometers can also be used to monitor humidity. You can review care information at the link below. http://www.anapsid.org/bearded.html

As long as the room temp doesn't drop below 70 F overnight, Lincoln should be fine. A nighttime drop in temps is normal in a beardie's natural environment anyway. Be sure to pick up a spare along with the replacement tomorrow. In a pinch, a hot water bottle wrapped in a hand towel can be used as a heat source.

Thanks for your question about Smaug, and thanks for the photo as well! I think that you have a good start to your set up, and that we can tweak a few items. First, your lighting situation appears adequate - I see a UVB light (please change this bulb every 4-6 months), a basking light, and a ceramic heat bulb. I would ensure that your temperatures are appropriate for this species, and that you are monitoring them using digital thermometers (I think that you see both a digital and analog thermometers currently) at the level of Smaug. Analog thermometers are inaccurate, so I don't recommend using them (also, they are high up on the sides of the enclosure, so they wouldn't be giving an accurate temperature read for Smaug). For the cage furniture that you have, I like that you have places for Smaug to climb and hide. However, I would recommend having a hide on both the warm side of the enclosure and the cool side so that Smaug has choices. Same for the climbing structures. I may have missed a food and water dish in the enclosure - I would recommend that both of these be shallow, and be large enough for Smaug's entire body to fit within them. I cannot tell what type of shavings that you have on the bottom of the enclosure, but the only wood shavings that I recommend are aspen shavings. If they are pine, these can be irritating to the respiratory system. I hope that gives you a place to start, and thanks for using Petco Pet Education Center, formerly Petcoach!

Choose the largest cage your space and budget will allow. At minimum, a 55 gallon enclosure should be considered. Acceptable substrates include slate, reptile carpet, decomposed granite or large gravel. Yes, setting up a bio-active environment for beardies is possible. It will take a bit of research and effort to get it right.